Product Specification and Size :
Standard Specification: GB/T 6892, ASTM B221, EN754, EN 755
Alloy | Temper |
5xxx: 5083 | O, H112 |
6xxx: 6005, 6060, 6061, 6063, 6082,6463 | T5, T6, T66 |
Alloy Designation (For Reference)
Comparison of Alloy Designations for Aluminum Products
Alloy Series | Chinese Standard | American Standard | European Standard |
5xxx Series | 5083 | 5083 | EN AW-5083 |
6xxx Series | 6005 | 6005 | |
6060 | 6060 | EN AW-6060 | |
6061 | 6061 | EN AW-6061 | |
6063 | 6063 | EN AW-6063 | |
6082 | 6082 | EN AW-6082 | |
6463 | 6463 | EN AW-6463 |
Temper Designation (For Reference)
Temper | Definition |
O | Annealed |
H112 | Slightly strain harden from working at an elevated temperature or from limited amount of cold work |
T5 | Cooled from an elevated temperature shaping process and then artificially aged |
T6 | Solution heat-treated and then artificially aged |
T66 | Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through special control of the process (6000 series alloys) |
Available Size Range
Dimension | Range |
A | 10mm~200mm |
B | 10mm~200mm |
T | 2mm~15mm |
Length | 1,000~6,000mm |
Application
Aluminum angles are used in numerous industrial applications, including scaffolding, shipbuilding, transmission towers and furniture applications.
- Production Process: Extruded
- Form & Image: Equal Angle, Unequal Angle
- Surface Finish: Mill Finish, unless otherwise specified
- Surface Protection: Paper interleaved
Chemical Composition
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: Each | Others: Total | Al: Min. |
5083 | 0.40 | 0.40 | 0.10 | 0.40~1.0 | 4.0~4.90 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | remainder |
6060 | 0.30~0.60 | 0.10~0.30 | 0.10 | 0.10 | 0.35~0.60 | 0.05 | 0.15 | 0.10 | 0.05 | 0.15 | remainder |
6061 | 0.40~0.80 | 0.70 | 0.15~0.40 | 0.15 | 0.80~1.20 | 0.04~0.35 | 0.25 | 0.15 | 0.05 | 0.15 | remainder |
6063 | 0.20~0.60 | 0.35 | 0.10 | 0.10 | 0.45~0.90 | 0.10 | 0.10 | 0.10 | 0.05 | 0.15 | remainder |
6082 | 0.70~1.30 | 0.50 | 0.10 | 0.40~1.0 | 0.60~1.20 | 0.25 | 0.20 | 0.10 | 0.05 | 0.15 | remainder |
6463 | 0.20~0.60 | 0.15 | 0.20 | 0.05 | 0.45~0.90 | - | 0.05 | - | 0.05 | 0.15 | remainder |